Home | VSCOM Info | Partner Login | Contact | Language
VSCOM Home
  Search :

Products >> Network to Serial >> Serial Device Server

NetCom Plus 811 DIO

8x RS232 and 8+8x Digital-I/O

VScom NetCom+ (Plus) 811 DIO, an octal port Serial Device Server for Ethernet/TCP to RS232, with additional Digital-I/O by Modbus/TCP
Features
Specifications
Ordering Information
Drivers & Documentation
Datasheet
Inquiry this product
View Larger Image

The NetCom+ 811 DIO is an industrial-strength network-based serial device server for connecting eight RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtual Com Ports. The network is Gigabit Ethernet or optionally wireless by WLAN 802.11b/g/n.
The 8 Digital-Input and 8 Digital-Output signals operate via known the protocol Modbus/TCP.

Implemented in the NetCom+ Servers is an option to use the viaVPN system for Remote Access and Monitoring over Internet. viaVPN provides secure and strong encrypted access, without any re-configuration of firewalls. Once installed in the local network the NetCom+ are used exactly as without the option viaVPN. But at the same time the operation can be monitored from remote locations. If the serial port is not occupied by local access, also Virtual Com Port operation is possible from remote.

The NetCom+ 811 DIO Server uses a state-of-the art RISC processor for low power and cost effective design. Power supply is via DC adapter, or via Ethernet cable with POE IEEE 802.3af.
The serial ports enable data rates of up to 500kbps, including every non-standard bitrate. See the FAQ.

NetCom+ can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation. Modbus/TCP standard controls Digital-I/O function.
As modern devices the NetCom+ provide encryption for all communication.


Keywords: Serial to Ethernet converter, RS232, Device Server, Serial Port Server, RS232 zu Ethernet LAN Adapter, TCP/IP, Com Port Redirector, Modbus/TCP, Power over Ethernet

A Serial Device Server for TCP/IP on Ethernet, WLAN and Internet, RS232 as Com Ports in Windows. Also controls 8+8 Digital-I/O signals via standard Modbus/TCP protocol. NetCom+ is also written as NetCom Plus. 8-Port device: NetCom Plus 811 DIO.
Features

  • Phased Out, no longer available
  • Ethernet to serial 8 port RS232
  • 8 Digital-In / 8 Digital-Out via Modbus/TCP
  • Virtual Com Port driver for Windows
  • Secure Server with latest SSL/AES-256 encryption
  • Operation in Driver Mode, TCP/IP and many other
  • Quick Configuration over Driver and Browser
  • ESD protection on serial ports, Ethernet, DC power
  • 19"Rack and Wall mount options
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  • Power supply via Ethernet

Back to Top  
Specifications
Ethernet Interface
  Speed/Type
100Mbps/10Mbps Auto-detecting
  Connector
RJ45 (8P8C) 8 pin
  LEDs
Power, WLAN, Ready, Ethernet Link / Speed
Back to Top  
Serial Interface
  No. of Ports/Type
8 × RS232
  Connector
DB-9 male
  Protection
16kV ESD surge protection
  Signals
TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
  Data bits
7, 8
  Stop bits
1, 2
  Parity
None, Even, Odd, Mark, Space
  Flow Control
RTS/CTS, XON/XOFF
  Baudrate
200 bps to 460.8/500 kbps
Supports non-standard baudrates
  LEDs
TxD/RxD for each port
Back to Top  
Digital Input / Output
  Input
8x isolated input signals
  Contact
Wet contacts on clamp pairs provide 5V.
To activate close the contact by button / switch / relay / ...
  Output
8x relay signals on three clamps (normal open/closed)
  Switching
1A 30V DC
0.25A 250V AC
Back to Top  
Software
  Network Protocols
TCP, UDP, Telnet, PPP, DHCP, ICMP, UPnP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
  Virtual-COM Mode
Driver creates virtual COM ports via NetCom protocol © for
Windows XP/7/8/10, Win-Server 2003 to 2008 R2 (x86/x64)
  Socket Modes
TCP RAW Server, TCP RAW Client, UDP Mode, Print Server
Automatic switching between Virtual-COM and TCP-RAW Server modes.
  Tunnel Modes
Null Modem Tunnel and IP Modem
  Fixed TTY Drivers
socat Tool, Linux OS
  Digital-I/O
Modbus/TCP to get values and control output signals
Back to Top  
Installation & Configuration
  Installation
NetCom Plus Manager automatically finds NetCom Plus devices in the local network.
  UPnP
With Network discovery enabled NetCom Plus servers announce their presence via UPnP making their IP visible.
  Configuration
via WEB-Browser, Driver Panels, NetCom Manager, serial console, Telnet console or SNMP
  Firewall
Virtual-COM mode works through firewalls
  Firmware Update
via WEB Browser
Back to Top  
Security
  Password Protection
for all available configuration options e.g. via WEB-Browser
  Secure Server
create openVPN™ tunnels, for encrypted transmission of all serial and configuration data using high security SSL/TLS standards.
Back to Top  
viaVPN Remote Access (option)
  Connect via Internet
viaVPN technology provides easy and secure access to remotely installed NetCom Plus servers for their configuration or for connecting their virtual COM ports through Internet. With the viaVPN option the NetCom Plus servers are no more limited to only work inside of a local network.
  Security
All communications use openVPN-tunnels encrypted by SSL/TLS and AES-256 standards.
  Firewall friendly
No Reconfiguration of firewalls is required for viaVPN remote access.
Back to Top  
Wireless interface (option)
  Standards
2.4GHz Radio, supports IEEE Std. 802.11b/g/n
  WLAN Modes
Access Point (AP) or Client (Station)
  TX Power
802.11b:
Typ. 15.5dBm ±1.5 dBm @ 1Mbps (DSSS)
Typ. 15.5dBm ±1.5 dBm @ 11Mbps (OFDM)
802.11g:
Typ. 15.6dBm ±1.5 dBm @ 6Mbps (CCK)
Typ. 13.5dBm ±1.5 dBm @ 54Mbps (OFDM)
802.11n:
Typ. 13.4dBm ±1.5 dBm @ 6.5Mbps (OFDM)
Typ. 13.3dBm ±1.5 dBm @ 150 Mbps(OFDM)
  RX Sensitivity
802.11b:
-95.6dBm @ 1Mbps, -88dBm @ 11Mbps
802.11g:
-91.3dBm @ 6Mbps, -74.2dBm @ 54 Mbps
802.11n:
-88.8dBm @ 6.5Mbps (20 MHz), -72dBm @ 72.2Mbps (20 MHz)
  Transmission Rate
802.11b:
11Mbps
802.11g:
6 to 54Mbps
802.11n:
6.5 to 150Mbps
  Transmission Distance
Up to 100m in open areas
  Wireless security
WEP
WPA
WPA2
WPA2-Enterprise (IEEE 802.1X/RADIUS)
  Antenna Connector
RP (Reverse-Polarity) SMA
Back to Top  
Power Requirements
  Input Voltage
15 - 54V DC
  Power Consumption
0.4A @ 19V, 8W max
  Connector
3-pin Terminal Block
  Power over Ethernet
PoE Class 0 Device, IEEE 802.3.af, 8W max.
Automatic switch between PoE and local power
Back to Top  
Housing and Mounting
  Case
0.8mm sheet metal
  Weight
w/o box 0.9kg; w/h box 1.5kg
  Dimensions
196×147×44 mm³ (W×L×H)
  Packaged
310×192×60 mm³
  Mounting
19-inch Rack
Wall mount
Back to Top  
Environmental Data
  Operating Temp
−20°C - 65°C
  Storage Temp
−20°C – 85°C
  Ambient Humidity
5-95% non condensing
Back to Top  
Standards
  Declarations
CE, FCC
  EMI
EN 55022 Class B
EN 61000-3-2: Limits of harmonic current emissions
EN 61000-3-3: Limitation of voltage changes
47 CFR FCC Part 15 Subpart B
  EMS (EN 55024)
EN 61000-4-3: Radiated RFI
EN 61000-4-4: Electrical Fast Transient
EN 61000-4-5: Surge
EN 61000-4-6: Induced RFI
EN 61000-4-8: Power Frequency Magnetic Field
EN 61000-4-11: Power supply dips
  ESD
EN 61000-4-2 4kV contact 8kV air for
Serial Ports
USB
Ethernet
DC Power connector
Back to Top  
MTBF (Mean Time Between Failures)
  MTBF
available soon
  Standard
Telcordia (Bellcore) Standard; RelCalc. 5.0 BELL-7
Back to Top  
Warranty
  Warranty Period
2 years
Back to Top  
Open Source Software
  Licenses
This product uses open source software to fulfill part of its functions. Licenses for the open source software are granted under the GNU General Public License in various versions. For details about those see the information in the firmware download and visionsystems.de/opensource
Back to Top  
Ordering Information
  6683
NetCom Plus 811 DIO (8x RS232, 8+8x Digital-I/O, supply via Ethernet)
Back to Top  
Options
  6030
Power supply adapter 15V DC, 1A
  6679
Activate option viaVPN for secure remote access over Internet
  6689
WLAN Kit internal
internal module 802.11b/g/n, pigtail and antenna
Purchase time option, not for later retrofitting
  6061
DB9F-to-RJ45 for changing from DB9 to CAT5 wiring
(Optimised for RS422/485 operating modes)
  6062
RJ45-to-DB9M for changing back from CAT5 to DB9 wiring
(Required to match the DB9 pinout at NetCom Plus)
  661
Serial Null-Modem adapter 9PF-9PF, change male to female
Back to Top  
Packaging
  Packing list
NetCom Plus Serial Device Server
Terminal block for Power Supply
Terminal blocks for Digital-I/O
19-inch Rack Mounting brackets
Wall mounting kit
Back to Top  
You can purchase VSCOM's products easily from a wide variety of leading technology distributors or partners. Please call us or contact us by mail to find the best ordering method for your needs.
 
  * Specifications are subject to change without notice.
  * All the trademarks and brands are property of their rightful owners.

About VSCOM | Impressum | Contact Us | Term & Conditions | Privacy Policy© 1993-2024 VS Vision Systems GmbH. All rights reserved.