Features |
- Industrial VPNRouter with Firewall, NAT & DNS
- Secure remote access with VPN tunnel
- VPN with SSL/TLS and AES-256
- Easy network setup using SimpleVPN
- Supports Ethernet, WLAN and 3G/4G
- Rich connectivity: LANs, COMs, USBs
- ESD surge protection
- Low Power, fanless, secure connectors
- Operating temperature range: -20°C - +65°C
- DIN RAIL /Wall mountable
- Robust metal case
|
Back to Top |
Specifications |
SimpleVPN |
Functionality |
SimpleVPN implemented in to VPN Routers can create a network of VPN tunnels. The network has star topology: all Client Routers (in Branches or Home Offices) connect to one central Server Router (in the Head Office). The Server acts as a central Hub/Switch for all data transfers: each PC in an office communicates with any other PC in other offices over the Server/Router. Changes in the configuration of Clients are easily done on the Server. |
Security |
Based on OpenVPN with SSL/TLS and AES-256 |
No. of VPN Tunnels |
Depends on Internet connection Max. 5 Clients per Server in typical applications More Clients are possible with low data transfer demand |
Management |
The VPNRouter acting as Server allows the configuration of all Clients. Transfering the configuration to other clients can be done via
USB-Stick File Upload / Download Ethernet cable (before deploying the Client Routers)
|
Keys / Certificates |
Generated locally on the VPNRouter, or upload them from another reliable source |
Device Roles |
Router Role: In this mode the VPN Router can be configured as Router providing access to the Internet via Ethernet, 3G/4G Modem or WLAN. Ethernet supports xDSL, TV-Cable or fiber. The VPN tunnels are supported on all types of media. Internet and VPN access is granted to the local LAN ports, behind the built-in Firewall.
Gateway Role: A VPN Router is placed into an existing company's local network, creating a VPN Gateway for IP addresses connected by VPN tunnels. PCs and other Devices in the local network use this Router as a Route to access the other offices. |
Remote Access / Remote Service |
The integrated software services also allow secure VPN connections to machines and devices with serial ports, CAN Bus interfaces, facilitating smart remote control of these interfaces on the VPN Routers. Using VSCAN API for CAN-Bus, RFC 2217 for serial ports and Modbus/TCP for Digital I/O full remote access to the machines is enabled in a very convenient way. Machines and devices with LAN interfaces are remote connected via LAN ports of the VPN Router. |
Back to Top |
Software |
Networking Services |
Firewall with NAT, DHCP and DNS NTP, Dynamic DNS, UPnP |
Interface Services |
These interfaces allow remote access Serial Port RS232/RS422/RS485 via RFC 2217 and Telnet
|
Back to Top |
System |
Hardware |
ARM Cortex-A8 RISC CPU @ 600MHz 256MB DDR3 Real time clock with battery backup
|
Mass Storage |
256MB NAND Flash memory SD 2.0 / SDHC microSD-card slot
|
Network |
1x 1000/100/10 Mbps Gigabit Ethernet 1x 100/10 Mbps Fast Ethernet WLAN 802.11b/g/n (optional) 2 x SMA antenna sockets available
|
Serial Peripherals |
1x USB 2.0 Host 1x RS232/422/485 high speed
|
LED |
1x Power, 1x WLAN, 1x Application LAN: 2x Link and Speed COM: TxD and RxD
|
DIP Switch |
4 x switches for user's application |
Back to Top |
Serial Ports |
Features |
1x RS232/422/485 Highspeed UART, 64 Byte FIFO (16C750) RS232: up to 921.6/1000 kbps RS422/485: up to 3.7 Mbps
|
Available Modes |
Configured by Software RS232 RS422 full duplex RS485 4-wire, full duplex RS485 2-wire, half duplex, without echo
|
Signals |
RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422: Tx+/-, Rx+/-, GND RS485 2−wire: Data+/-, GND RS485 4−wire: Tx+/-, Rx+/-, GND
|
RS485 Data Direction Control |
Driver Automatic via RTS |
Back to Top |
Wireless interface (option) |
Standards |
2.4GHz Radio, supports IEEE Std. 802.11b/g/n |
WLAN Modes |
Access Point (AP) or Client (Station) |
TX Power |
- 802.11b:
- Typ. 15.5dBm ±1.5 dBm @ 1Mbps (DSSS)
- Typ. 15.5dBm ±1.5 dBm @ 11Mbps (OFDM)
- 802.11g:
- Typ. 15.6dBm ±1.5 dBm @ 6Mbps (CCK)
- Typ. 13.5dBm ±1.5 dBm @ 54Mbps (OFDM)
- 802.11n:
- Typ. 13.4dBm ±1.5 dBm @ 6.5Mbps (OFDM)
- Typ. 13.3dBm ±1.5 dBm @ 150 Mbps(OFDM)
|
RX Sensitivity |
- 802.11b:
- -95.6dBm @ 1Mbps, -88dBm @ 11Mbps
- 802.11g:
- -91.3dBm @ 6Mbps, -74.2dBm @ 54 Mbps
- 802.11n:
- -88.8dBm @ 6.5Mbps (20 MHz), -72dBm @ 72.2Mbps (20 MHz)
|
Transmission Rate |
802.11b: 11Mbps 802.11g: 6 to 54Mbps 802.11n: 6.5 to 150Mbps |
Transmission Distance |
Up to 100m in open areas |
Wireless security |
WEP WPA WPA2 WPA2-Enterprise (IEEE 802.1X/RADIUS)
|
Antenna Connector |
RP (Reverse-Polarity) SMA |
Back to Top |
Power Requirements |
Input Voltage |
9 — 54V DC |
Power Consumption |
0.2A @ 12V minimal 0.3A @ 12V typical, plus devices on USB
|
Connector |
3-pin Terminal Block |
Back to Top |
Housing and Mounting |
Case |
0.8mm sheet metal |
Weight |
w/o box 250g; w/h box 500g |
Dimensions |
115×73×25 mm³ (W×L×H) |
Packaged |
150×107×48 mm³ |
Mounting |
DIN Rail (option) Wall mount (option)
|
Back to Top |
Environmental Data |
Operating Temp |
−20°C — 65°C |
Storage Temp |
−30°C - 85°C |
Ambient Humidity |
10-85% non-condensing |
Back to Top |
Standards |
Declarations |
CE, FCC |
EMI |
EN 55022 Class B EN 61000-3-2: Limits of harmonic current emissions EN 61000-3-3: Limitation of voltage changes 47 CFR FCC Part 15 Subpart B
|
EMS (EN 55024) |
EN 61000-4-3: Radiated RFI EN 61000-4-4: Electrical Fast Transient EN 61000-4-5: Surge EN 61000-4-6: Induced RFI EN 61000-4-8: Power Frequency Magnetic Field EN 61000-4-11: Power supply dips
|
ESD |
EN 61000-4-2 4kV contact 8kV air for Serial Port USB Ethernet DC Power connector
|
Back to Top |
MTBF (Mean Time Between Failures) |
MTBF |
39.0 Years @ 25°C 13.0 Years @ 45°C |
Standard |
Telcordia (Bellcore) Standard; RelCalc. 5.0 BELL-7 |
Back to Top |
Warranty |
Warranty Period |
2 years |
Back to Top |
Open Source Software |
Licenses |
This product uses open source software to fulfill part of its functions. Licenses for the open source software are granted under the GNU General Public License in various versions. For details about those see the information in the firmware download and visionsystems.de/opensource |
Back to Top |
Ordering Information |
6863 |
VPNRouter iR 2110 |
Back to Top |
Options |
|
Power adapter 110-230V AC to 12V @1A, DC, EU plug |
|
Power adapter 110-230V AC to 12V @1A, DC, US plug |
6689 |
WLAN Kit internal internal module 802.11b/g/n, pigtail and antenna Purchase time option, not for later retrofitting |
6692 |
DK-NCP DIN-Rail mounting kit |
6693 |
WK-NCP Wallmount kit |
Back to Top |
Packaging |
Packing list |
VPNRouter system iR 2110 Printed Quick Installation Guide Terminal block for Power Supply
|
Back to Top |